Electric Motors for Light Commercial Vehicles
We offer electric motors for light commercial vehicles, including pickup trucks, light trucks, vans, and minibuses. Our solution range encompasses single motors, integrated motor-gearbox assemblies, and dedicated controller systems to meet diverse application requirements.
All motors are based on PMSM technology, delivering high efficiency and a compact design that optimizes vehicle layout while reducing weight and space requirements.
The central drive configuration is a mature and streamlined solution, requiring minimal chassis modifications and enabling a faster transition to electrified mobility.
Email: contact@brogenevsolution.com
Strong R&D Capabilities
We have full-cycle validation capabilities for electric powertrain development. Our rigorous testing process, including bench tests and vehicle trials, ensures continuous improvement and reliable performance. With advanced testing devices, 20+ test vehicles, and a robust experimental process, we validate products through a range of tests, including immersion, temperature extremes, salt spray, vibration, durability, noise, and road tests. This ensures excellent reliability, cost-efficiency, power, and lightweight design of our systems.
- System Integration Development
- Software Development
- Motor & Controller Development
- Transmission Development
Benefits of Brogen Electric Motors for Light Commercial Vehicles
Enhanced Motor Efficiency
Utilizes advanced designs such as thin silicon steel laminations, high magnetic permeability materials, and sinusoidal air-gap flux density optimization. These innovations increase motor efficiency, with peak efficiency exceeding 97% and over 90% of the operating range achieving system efficiency ≥85%.
Low-Noise Operation
Features rotor segmented skewing and optimized auxiliary slot parameters at the rotor's outer edge, effectively reducing motor noise.
Optimized Cooling System
Incorporates a dual-helical water channel design to enhance heat dissipation and stability while maintaining optimal water resistance and pressure differential.
Mud and Sand Protection
Equipped with a flange dustproof structure to prevent mud, sand, and wastewater from entering the motor, improving long-term reliability.
Brogen Offerings of Electric Motors for Light Commercial Vehicles
1. Central Direct Drive Motor + Controller
The central direct-drive solution replaces the original engine with an electric motor while retaining the driveshaft and other existing structures. It can be integrated into the current vehicle platform without major modifications to the chassis, axles, or differential. This solution is mature, highly reliable, and easy to develop, making it a mainstream choice in the industry. We offer the electric motor and controller system specifically designed for this configuration.
Value for Clients
- Easy conversion: ideal for retrofitting traditional fuel vehicles with minimal modifications and low risk.
- Cost-effective & fast development: short development cycle with manufacturing costs similar to conventional vehicles.
- Superior NVH performance: ensures a quieter and smoother ride.
- High efficiency: over 95% peak efficiency with a broad high-efficiency range for optimal performance.
- Wide applicability: suitable for sanitation trucks, short-haul cargo vans, range-extended models, and more.
Our Offerings
Please note that these parameters are for reference only. For detailed specifications, please contact our sales team. Additional options and controllers are available upon request. Email: contact@BrogenEVSolution.com
| Model | Motor Power (Rated/Peak) | Motor Torque (Rated/Peak) | Maximum Speed |
| OEDMS50 | 40/75 kW | 225/500 N.m | 5000 rpm |
| OEDMS80 | 60/100 kW | 400/800 N.m | 4500 rpm |
| OEDMS100 | 60/110 kW | 500/1000 N.m | 4000 rpm |
| OEDMS120 | 60/120 kW | 635/1200 N.m | 3800 rpm |
| OEDM500 | 60/120 kW | 300/500 N.m | 5000 rpm |
| OEDM850 | 75/120 kW | 350/850 N.m | 5000 rpm |
| OEDM1000 | 60/130 kW | 400/1000 N.m | 4000 rpm |
| OEDM1300 | 90/190 kW | 550/1300 N.m | 4000 rpm |
| OETZ260XS-40-05 | 40/80 kW | 318/900 N.m | 3000 rpm |
| OETZ260XS-60-01 | 60/110 kW | 358/950 N.m | 4500 rpm |
| OETZ260XS-60-04 | 60/120 kW | 358/1000 N.m | 4500 rpm |
| OETZ260XS-60-04B | 60/100 kW | 318/600 N.m | 4000 rpm |
| 2SDK210XS60A | 60/120 kW | 127/280 N.m | 4500 rpm |
| 2SDK290XS105A | 105/165 kW | 500/1000 N.m | 4000 rpm |
Highlighted Products
Explore our most popular and widely used systems for light commercial vehicles. Additional options are available upon request to meet your specific needs.
60 kW / 120 kW Direct Drive Motor
- Have been deployed in over 8,000 EVs globally and in mass production now
- Strong power performance and excellent hill-climbing capability
- Maintain efficient output across a wide range of speeds
- Ideal for urban deliveries and intercity freight
30 kW / 60 kW Direct Drive Motor
- Have been deployed in over 10,000 EVs globally and in mass production now
- With built-in ASR for overall vehicle safety by preventing wheel slippage
- Achieves up to 95% peak efficiency
- High EMC design meets Class 4 standards
2. Central Drive - Integrated Electric Motor + Gearbox/Transmission + Controller
For this solution, we offer an integrated electric drive system, available in two configurations: a 2-in-1 motor + gearbox/transmission or a 3-in-1 motor + gearbox/transmission + controller system. The compact integrated design contributes to a lighter vehicle and optimizes the overall layout.
By incorporating a gearbox/transmission, the system can achieve higher vehicle speeds while utilizing a high-speed motor. This allows for a smaller, lighter motor to achieve the same performance as a larger direct-drive motor, while also enhancing the vehicle’s adaptability and efficiency.
Value for Clients
- Optimized vehickle layout: the integrated motor+gearbox design enhances overall vehicle structure.
- Cost-effective performance: the transmission enables a smaller motor to match the power of a larger direct-drive motor, reducing size and cost.
- High efficiency: over 95% peak efficiency with a broad high-efficiency range for optimal performance.
- Easy conversion: ideal for retrofitting traditional fuel vehicles with minimal modifications and low risk.
- Cost-effective & fast development: short development cycle with manufacturing costs similar to conventional vehicles.
- Superior NVH performance: ensures a quieter and smoother ride.
- Optimized vehickle layout: the integrated motor+gearbox design enhances overall vehicle structure.
Our Offerings
Please note that these parameters are for reference only. For detailed specifications, please contact our sales team. Additional options and controllers are available upon request. Email: contact@BrogenEVSolution.com
| Model | Motor Power (Rated/Peak) | Motor Torque (Rated/Peak) | Maximum Speed | Speed Ratio |
| OETED1360 | 60/120 kW | 300/500 N.m | 5000 rpm | 2.73/1 |
| OETED2330S | 75/120 kW | 350/850 N.m | 5000 rpm | 2.741/1 |
| OECE1T100B | 60/120 kW | 150/350 N.m | 12000 rpm | 3.04 |
| OECE1T100C | 60/100 kW | 160/330 N.m | 10600 rpm | 3.04 |
| OECE1T10004 | 60/100 kW | 120/280 N.m | 12000 rpm | 3.04 |
| TZ180XS-40-4+I30 | 40/80 kW | 110/300 N.m | 10000 rpm | 3.037 |
| TZ230XS-60-06 | 60/115 kW | 143/325 N.m | 12000 rpm | 3.037 |
Highlighted Products
Explore our most popular and widely used systems for light commercial vehicles. Additional options are available upon request to meet your specific needs.
60 kW / 100 kW 3-in-1 Electric Powertrain
- Compact design integrating motor, motor controller, and gearbox
- Reduced weight by utilizing shared housing and wiring harnesses
- Provide more flexibility in vehicle layout to create scalable platforms
- Wide applications for pickup trucks, vans, and light trucks
60 kW / 115 kW 2-in-1 Electric Powertrain
- Compact design integrating motor and gearbox
- Over 8,000 units have been installed, demonstrating stable operation
- Powerful performance with exceptional climbing ability
- Maintains high-efficiency output across a wide speed range
How We Work
Navigating Our Process
Demand Analysis & Project Evaluation
Once we receive your inquiry, our experts will connect with you within two business days to understand your specific requirements for the EV solution and conduct an initial feasibility evaluation of your project.
Project & Technical Coordination
If the project is deemed feasible, our engineering team will collaborate closely with your team on both hardware and software aspects to develop a viable solution. We will also provide a detailed quotation based on the technical requirements.
Development, Manufacturing & Testing
For customized or modified systems, we proceed with product development, including hardware and software adaptations. Our EV systems undergo rigorous testing to ensure quality, reliability, and full functionality before deployment.
In-Time Global Shipping & Delivery
We have established strong partnerships with international shipping providers, ensuring safe and timely delivery of products to your specified location. This guarantees a smooth and efficient deployment of your EV project.
Full-Stage Remote/Onsite Technical Support
We provide technical support throughout the entire project lifecycle, including consultancy, hardware and software development, calibration, and both onsite and remote debugging, ensuring optimal performance and long-term success.
Case Studies
3-ton Electric Pickup Truck in Thailand
In 2022, we provided an electric powertrain solution to our client in Thailand for their electric pickup truck project. The e-powertrain solution includes the 2-in-1 system integrating the electric drive motor and the reducer, and a motor control unit.
Once our e-powertrain system was integrated into the client’s electric pickup truck, they conducted rigorous testing, including water wading, high-speed performance, and other essential assessments. Our system successfully passed all tests, making the client highly satisfied.
Due to the successful outcome of this project, the client expanded their collaboration with us, requesting e-powertrain solutions for other models, including their 6-ton medium-duty trucks and 25-ton heavy-duty trucks. Throughout this collaboration, we also supplied other systems such as onboard chargers and battery thermal management systems.
Electric Light Truck in South Korea
In 2021, we provided the electric powertrain solution to one client in South Korea for their light-duty truck project. The solution includes the 120 kW electric motor, integrated with the gearbox and controller, and the water pump, EHPS, DC/DC converter, and air conditioning compressors. This combination ensured that our solution perfectly aligned with the unique demands of their EV projects.
Additionally, we provided professional technical support to ensure their electric light-duty trucks were operational quickly and efficiently. In just ten days, our electric powertrain solution had the customer’s vehicles up and running. The success made local news. The customer thanked us for a transformative journey that successfully converted the electric light-duty truck into their fleet and laid a solid foundation for their electric future. We’re currently in active discussions with the customer about electrification options for other models in their fleet.
Gallery
Our electric motors for light commercial vehicles have been extensively adopted in electric vehicle applications worldwide, demonstrating proven performance in large-scale deployments. These solutions have been successfully exported to numerous markets, including the United States, Canada, Australia, Malaysia, Indonesia, the Philippines, Mexico, Thailand, and beyond.
Today, the majority of our electric motor systems are in full-scale mass production, ensuring exceptional reliability, scalability, and readiness to support large fleet electrification initiatives.
60 kW electric motor
60 kW electric motor
Vans with our motor
Vans with our motor
Brogen electric motor shipment
Brogen electric motor
Brogen 3-in-1 electric powertrain
Brogen 2-in-1 electric powertrain
Brogen electric motors shipment
Brogen electric motors shipment
Brogen electric motors shipment
Brogen electric motors shipment
Frequently Asked Questions
Yes. We support small-batch orders for prototype development, with flexible MOQ and lead time.
- Our electric motors for light commercial vehicles are designed and tested in compliance with Chinese national standards, which, in many aspects, are more stringent than international equivalents.
- For some models, we do not preapply certain certificates, but we can provide the necessary technical documents and support to assist you in completing local certifications in your country.
We offer full-cycle support, including pre-sales consultation, system matching, debugging, remote diagnostics, and after-sales services. Our multilingual team ensures smooth communication throughout.
We offer industry-standard or extended warranties depending on the project. For batch orders, we prepare spare parts in advance to reduce downtime and handle warranty claims efficiently.
We support flexible shipping terms such as FOB, CFR, and CIF. Lead times vary based on system type and customization.
- We provide tailored EV solutions, but not ready-to-install retrofit kits.
- To ensure optimal system performance and safety, we require that our clients have a professional EV engineering team with hardware and software capabilities.
- During the early stage of the project, we also expect the client’s technical team to participate in solution discussions to ensure the best fit between our solution and your vehicle architecture.
Contact Us
Get in touch with us by sending us an email, using the Whatsapp number below, or filling in the form below. We usually reply within 2 business days.
Email: contact@brogenevsolution.com
Respond within 1 business day
Whatsapp: +8619352173376
Business hours: 9 am to 6 pm, GMT+8, Mon. to Fri.
LinkedIn channel
Follow us for regular updates >
YouTube channel
Ev systems introduction & industry insights >